RXL SL Carbon Handlebars, Drop Handlebars 31.8mm, Road Bike Handlebars Gravel Drop Bars 400mm 420mm 440mm, UD Matte Handle Bent Bars Fixed Gear Aero Bars for Road Bike

Product Description

Material: T700 Carbon Fiber UD/3K Matte/Glossy Size: 31.8*400/420/440mm; Drop:127mm; Reach:104mm Weight: Approx 200-255g (Different size, different weight.) Suitable for: Road bike,gravel bike,cross-country bike,trail bike,trail rides,mountain bikes,hybrid bike, fixie bike,fixed gear bike and dirt bicycles Advantage: Lightweight; aerodynamic; ergonomic;very comfortable in the hands; beautiful design ,looks great ; very solid bar Four hand position options: Our wind drop bars give you (normally) 4 hand positions: Middle of the bar…On the corners…On the hoods…On the drops.ergonomic bend in bars & flats for less wrist stress. Bike Type: Road racing,road sport touring,road touring,cyclocross,track,race,cross country, winter enduro ride, clamps, climbs, downhill, riding hills, climbing hills,mountain biking Sport Type: Cycling, Racing,Camping & Hiking, BMX, Climbing, Exercise & Fitness, Track & Field, Triathlon

Carbon Fiber Better than Aluminum Alloy:

Lighter in weight. Very stiff. Much more beautiful in appearance. Brighter in Color. Anti-Shock. Has proper elasticity, improving your bicycle’s class in minutes.Great replacement for damaged handlebars.

Great Vibration Dampening：

using Triathlon set up, less road vibration, On rougher roads it helps to soak up some of the bumps and help absorb road vibrations，you can commute on some pretty rough roads ,noise dampening

Offers comfortable ride position:

top of hoods/shifters, ergonomic bend in bars & flats for less wrist stress, The flat top offers multiple positions to rest your hands in a more upright position, the forearms feel really good when laying down on the bars too.

Helpful TIPS for our customers:

1. Our handlebar diameter is 31.8mm, please use the 31.8 caliber stem.

2. Highway bike handlebar Do not enter the mountain road, the wrong cycling will crash the road handlebar.

3. Install the product correctly, please follow the specified tightening torque (4Nm).

4.Tighten the screws. Since it is made of carbon, we recommend tightening the body to support it by tightening with your hands. Cracks can occur when strong tensions occur.

5. The highway road handlebars may be slippery when wet, so suggest using a grippy 1mm bar tape on flat aero handles and a 2-3mm bar tape after shifter levers.

6. Please correct use our company’s accessories, we will adopt the views of the majority of cycling enthusiasts to improve our services.

Useful practise of internal routing cable installation

1. To make it simpler, get about a foot length of nylon tubing 2 or 3 mm in diameter. Poke it through the elongated hole nearest the center and look for the end of it at the other hole. Grab it with a pair of needle nose pliers and pull it through. Then thread the cable through and slide off the nylon tubing. Repeat this for other brake or shifter cable so you have a pair of cables running through.

2. Using the cable as a guide, slide the brake outer sleeve on first, again from the center hole. This is the tricky bit because the hole is near the bend so the sleeve doesn’t naturally run into the exit hole. You had to pull the cable tight so the end of the sleeve was up against the inside of the hole and with a small screwdriver under the cable, levered it up so the sleeve aligned with the whole then pulled it through. Repeat this for the smaller shifter outer sleeve.

Assembly Instructions:

1. Please check whether your drop bar accessories are complete.

2. When assembling, please make sure that the width of the stem head is within 45mm, and the handlebar diameter is 31.8mm. The width of the center must be confirmed to be able to lock the product properly, and manually install it with hexagonal wrench.

3. This drop handle bar is for internal cable routing, the threading process will be cumbersome, please be patient.

4. When installing the brake, please use the torque reasonably and install it manually.

5. Please go to a standard bicycle shop for assembly and maintenance.

6. The end of the handlebar can be cut in a regular bicycle shop in order to meet personal preference. Before cutting, please remove the handlebar, tightly wrap tape on both sides of the handlebar cutting line, and use the smallest blade saw to cut the fixed position. After cutting, use 400 grit sandpaper to smooth it.

Customers’ Show:

【Lightweight,Stiff and Noise dampening 】Light weight, sturdy, less road vibration, using Triathlon set up, On rougher roads the gravel bike handlebars helps to soak up some of the bumps and help absorb road vibrations，you can commute on some pretty rough roads .
【Multi-applications 】 the carbon handlebars road bike is a good addition to most mountain bikes,road bike,hybrid bike, fixie bike,gravel bike,fixed gear bike ,track bike and mtb dirt bicycles. Awesome options for cycling racing cyclocross highway winter/enduro ride, riding hills,climbing hills, and perfect for female male cyclist, riders ,sprinters, climbers.
【Good handling, Super comfy】These bicycle drop handlebars seem quite ergonomical, comfortable on the hands with lots of contact and easy reach to the shifters. these road handlebars will greatly increase your comfort and time spent in the drops, super smooth and add your confident. Enjoying the comfort of your hands on the bars for a long ride.
【High Balance Ability】Ergonomic design, reduce air resistance, the fixie road bike handlebar makes your ride easier. Adopts one-piece integrated design. Provide more natural control, comfortable grip wing-shaped handle, which is beneficial to relax the upper body when climbing and increase the air intake.