LECHEN 20inch 48v1500w Rear Wheel Hub Motor Kit Matched 4.0 Fat Tire for Electric Bicycle Conversion Kit with LCD4 Display to Snow Ebike Kit

Product Description

Controller

● Dimension :190*82*41 mm ● Weight :550g ● Cable length :all about 13-15cm ● Mosfets :12mosfets ● Maximum current :35±1A ● Rated voltage :DC36V/48V ● Speed set :1-4.2V ● Rated current :17A ● Brake input :Low-Level● Low voltage protection :DC30/40±0.5V

Thumb Throttle

● Type: 130X Thumb Throttle ● Voltage:12V 24V 36V 48V 52V 60V 72V ● Wire length:180cm(SM) ● Weight :100g ● WP :IP76 ● Plug Type:3 Pin SM plug ●Installation:Left/Right ● Apply to:E-bike, E-Scooter, Ebike Conversion Kit●Function:E-bike accelerator Finger Thumb Throttle

PAS Sensor

● Type:KT-BZ-4 (8) Pulse assist sensor ● Voltage:36V/48V ● Cable Length:180cm including the connector ● Magnet :8 Magnets ● Weight :100 g ● Plug Type:3 Pin SM plug ● Color :As pictures shown● Material:Plastic● Installation:Left● Adaptation:Ebike Electric Bike Bicycle

E-Brake

● Type:115PDD E-brake Cut Off Power ● Voltage:12V 24V 36V 48V 60V 72V ● Cable Length:180cm (SM) ● Weight :300g ● WP :IP76 ● Material:Aluminum Alloy ●Installation:Left/Right ● Size:L156mm W105mm H34mm ● Plug :2 pin SM plug

Controller

Thumb Throttle

PAS Sensor

E-Brake

Electric Motor

● Rated Voltage：48V ● Rated Power：1500W ● Rated Speed：about 45-50 km/h ● RPM：414-487RPM ● Torque(N.M)：71-74.6N.M ● Front Fork(mm)：170mm ● Brake Type：Disc Brake ● Type：Brushless gear hub motor ● Installation location:Rear wheel ● Spokedwith double-wall Aluminum alloy rim with 36 eyelets,stainless steel spokes ● Load≤200KG ● Motor cable length：200mm ● Wheel size：20inch

Rear Motor Installation

Remove your bicycle rear wheelMount your Disc Brake on the motorMount the rear wheel on the bike

Toqure arm

Mount the Toqure arm on the rear motor

Display

Mount the Display

Brake

Mount Brake levers

Thumb Throttle

1. Mount Thumb Throttle

PAS Sensor

Mount the Pedal Assistant System (PAS)

Note: In this kit, it has BA-4(8) PAS, which has 8 magnets, not 12 magnets as shown in the picture above.

Connect all parts to the controller

Connect Controller Cables with all parts

Mount the Battery

Mount the Battery

[Basic Information]: The Default Parts of One Electric Fat Tire Bike Conversion Kit: Motor With Wheel, Controller, Display, Brake Lever, Thumb Throttle, Pas Sensor, Gift. (Not including the battery and tire) The whole kit adopt the KT system, so when you bring the kits cannot changed parts, because other parts if not using KT system cannot matched with our kit.
[Advantages] The price for one electric bike conversion kit will be more cheaper than one whole electric bike. We will provide the installation introduction, so installed will very easy. You just only transfer original tire in bike and changed to our prepare motor with wheel parts then linked all components. The installation will finished.We also attached the installation introduction in the kit.
[Introduction for Important parts] Rated Voltage:48V; Rated Power: 1500W; Rated Speed: about 45-50 km/h(27.9-31mph); RPM：414-487RPM Torque(N.M)：71-74.6N.M; Fork size (mm)：170mm; Brake Type：Disc Brake; Type：Brushless gear hub motor; Installation location: Rear wheel; Load≤200KG Motor cable length：200mm; Wheel size: 20inch wheel
[Service] We are committed to providing you with 100% qualified products and quality services. If your kit have any question in installation and using, feel free to contact me. Some parts broke, hope you cannot applicant the refund, please contact me first to talk about solve method.