JauoPay 36V 500W Electric Bicycle Conversion Kit 26″ E-Bike Brushless Gearless Front Hub Motor Wheel Dual Mode Controller for Road Bike Mountain Bike

Product Description

JauoPay 36V 500W Electric Bicycle Conversion Kit 26″ E-Bike Front Wheel Electric Bicycle Wheel Kit

Key Features:

1. 36 V 500 W super power Brushless Gearless Hub Motor

2. Road-legal and high speed kit.

3. Rare-earth metal magnet are used in the motor to efficiently produce large power.

4. Twist throttle has battery level display and power-cut off button

5. Brake Levers cut off the power supply to the motor safely.

6. 8 Point Crank speed sensor for pedal assist, allow you to works with all pedals, including Speedplay and Eggbeaters.

7. Dual Mode Controller, Motor works under Hall effect and non-Hall effect, extend life for electric bicycle.(If the components break down, controller will switch into non-hall effect mode, the motor will still be working.)

The 500 W system requires a 36 Volt battery with a nominal capacity not less than 10 AH.

Specifications:

· Brushless Gearless Front Hub Motor

· Aluminum Alloy Double Wall Rim

· 12 G × 2.6 mm Carbon Steel Spoke

· Average Speed: 15 Mph~22 Mph (25~35 km/h)

· Max load capacity: 150 KG

ALL YOU SHOULD KNOW ABOUT THE KEY SIZE BEFORE YOU BUY ONE

Frame Diameter: 22.56″ (57.3 cm)

Suitable for 26″ Bicycle Wheel

Frame Width: 0.94″ (2.4 cm)

Tire Recommendation: 26″ x 1.95″~2.125″ Tires

Motor Diameter: 9.84″ (25 cm)

Motor width: 1.18″ (3 cm)

The 27 mm high magnetic steel provide high stability of motor power.

Dropout: 3.94″ （10 cm）

M14 bolt size of axle

MAGNIFICENT MOTOR

Fine rubber handle bar and a twist throttle which has battery level display and power-cut off button.

Connected your brake wire to the brake Levers can do both liner brake and cutting off the power supply to the motor safely.

8 point high effective Pedal Assist Sensor (P.A.S) can activate the hub motor with the pedal driving, allows you to combine electric power and your own effort with a nice and easy riding way.

Winding Piper and cable ties help fixing the wire onto your bike.

Pedal Assistance System

►LEGAL SPEED – 36V 500W Powerful brushless gearless front hub motor can be reach up to 22mile/h (35 km/h) high speed. Double wall aluminium Alloy rim with spokes. Dropout: Front 100mm/Rear 135mm.
►Dual Mode Controller – Motor works under Hall effect and non-Hall effect, extend life for electric bicycle.(If the components break down, controller will switch into non-hall effect mode, the motor will still be working.)
►RIDE EASILY – 8 point high effective Pedal Assist System (PAS) can activate the hub motor with the pedal driving, allows you to combine electric power and your own effort with a nice and easy riding way.
►Battery Recommendation (not included) – 36 Volt battery with a capacity not less than 10Ah is required, 48 volt battery with a 11.6AH capacity if you chasing a higher speed.
►ALL Necessary Components Included – 500W Motor Front Hub Wheel, intelligent controller, twist throttle, brake levers, pedal assist sensor, and cable ties. (Battery and tyre are not included.)