G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window Geekstory, Better Than vk-172 GPS

Product Description

Description

Support GPS/Glonass/Galileo/Beidou 4 signalsSupport Windows 10/8/7/Vista/XP/CE，linuxSupport Google Earth/Ovi MapBuilt-in flash, USB power supply, default baud rate 9600, 1Hz output, NMEA-0183 protocol output

NMEA-0183 protocol output

GGA: Time, Location, Location TypeGLL: Longitude, Latitude, UTC TimeGSA: GPS receiver operation mode, positioning satellite, DOP value GSV: Visible GPS satellite information, elevation, azimuth, signal-to-noise ratio (SNR) RMC: Time, date, position, speedVTG: Ground Velocity Information

Precision:

Horizontal Position: Autonomous<2.5m average SBAS < 2.0m average Timepulse signal: RMS 30 ns Maximum height :50000 m Maximum speed :500 m/s Maximum acceleration :≦4G Update frequency :1-10 Hz Dimensions :60X24X9mm Operating temperature: -40°C to 85°C Storage temperature :-40°C to 85°C

Sensitivity

Tracking: -164dBm Capture: -159dBm Cold Start – 147dBmCold start Average :26 secondsWarm start Average: 24 secondsHot start average :1 second

G72 gps usb use the newer chip, better than vk-172 gps.This usb gps works with Windows, Linux and Google Earth, not for IOS Android
The device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change
You need to install driver before use it on window, but plug and play for raspberry pi.
How to Setup GPS for Raspberry Pi? Please contact me